Fittings: Running rigging
The reliable performance you need from your model yacht starts with quality fittings. We are proud to offer the all the PEKABE model yacht fittings for standing and running rigging you will need to complete your model. We are also pleased to offer our own mast fittings made specifically for our 3 different spar shapes.
 |
P-512 Single block. Used any time you need to turn a single line/sheet. Also as a turning block for jib trim or winch. Use any time you need some flexibility in the line and wish the block to limber with any motion to prevent fouling. | 9.50 |
 |
P-515 Single block used in a fixed position when flexibility is not an issue. Commonly seen as the turning block on the deck of IOM's. Also seen mounted on swing arm style winches to double the purchase of the sheets. | 9.50 |
 |
P-510 Single Block with becket. Use this block anytime you will have a return on your sheet or line. The becket provides you with a place to tie off your line and still maintain correct position to keep the block in proper alignment for minimum drag on the line and to prevent fouling. | 9.50 |
 |
P-525 double block without becket. Same use as 512 above but when more purchase is needed. Use this block as the turning block and tie off to a hard point. Pair it with 520 below to tie off on the becket and keep your blocks properly aligned. | 11.25 |
 |
P-520 Same idea as 510 above, but when more purchase is needed. Good for setup on backstay or vang on medium sized models. Has a becket to tie off your sheet and still keep blocks properly aligned. | 11.25 |
| P-530 Triple block for the situations where you need great strength and adjustment. Look for these as a boom vang on J Class model yachts. Triple purchase means triple the travel of your winch, so typically these are installed for hand adjustment only. | ||
| P-537 Same as the 530 above but includes the becket to tie off your line and have it maintain alignment for your blocks. | ||
 |
P-472 Thru deck fairlead. Use this for piping a sheet through your deck with minimal resistance. Two sheaves form an "S" curve so the line is passed through without rubbing on the sides. Ideal for winch drum lines to come up on deck or genoa sheet on AC boats. | 12.75 |
All material on this webpage is © copyright protected. Reproduction or use of any material is prohibited without specific written permission of the webmaster. Any third party material displayed here was done so under the same conditions.